Convergent Design nano3D Uživatelský manuál stáhnout pdf

nano3D™

Quick reference guide

For firmware version 1.6.145 09-3-10

Welcome and Thank You

Congratulations on selecting Convergent Design High Definition portable 3D recorder,

nano3D. It is manufactured in the USA and shipped from the factory in the most secure

packaging available. Please inspect the contents of the package. In the unlikely event that

you find any shipping damage or missing components, please contact us.

Shipping Contents

Your nano3D shipping container should have come packaged with the following:

1. nano3D recorder/player

2. remote trigger/LTC input/communication link

3. 9 inch HDMI cable (type C (mini) to type C)

4. Dual unit power supply (100 to 240 VAC Input: 12V DC @ 2A Output)

5. Power supply Y-cable

6. USB Reader (for CompactFlash cards)

nano3D Overview

The nano3D is an ultra compact state-of the-art 3D combiner/recorder/player that uniquely

utilizes the very high-quality Sony XDCAM 4:2:2 CODEC to write native Quicktime or MXF

(video/audio/timecode) files onto affordable Compact Flash media. nano3D takes all of the

basic functionality of the nanoFlash, and takes a giant leap further into the world of 3D video

processing and recording. Like nanoFlash, nano3D breaks new ground in terms of weight,

power, size, ruggedness, and ease of use. We are confident you will agree that the video

quality is visually indistinguishable from uncompressed (at 100+ Mbps Long-GOP or 180+

Mbps I-Frame modes).

Product Support and Contacts

Important: While the nano3D provides much more functionality than the nanoFlash,

each unit runs on the same basic firmware that a nanoFlash does. This ensures

greater reliability and ease of upgrade. Because of this, please read the nanoFlash

manual in addition to this guide before operating the nano3D. The information in this

document is not intended for use as a complete manual, but rather serves as an

extension of the nanoFlash manual—just as the nano3D serves as an extension of

functionality of the nanoFlash. The full nanoFlash manual can be found here:

http://www.convergent-design.com/Portals/58/Documents/nanoFlash_Manual.pdf

Please read this guide in addition to the nanoFlash manual before contacting support.

1. Support E-Mail: "cd” – “support” – “at” – “convergent-design” – “.com”

2. Sales E-mail: "cd” – “sales” – “at” – “convergent-design” – “.com”

3. Main Telephone: ++(720) 221-3861

4. Sales Telephone: ++(719) 930-1376

5. Web Site: http://www.convergent-design.com

6. Forum: http://www.dvinfo.net/forum/convergent-design-nanoflash/

1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - Product Support and Contacts

nano3D™Quick reference guideFor firmware version 1.6.145 09-3-10Welcome and Thank YouCongratulations on selecting Convergent Design High Definition po

Strany 2 - Setting up a 2D record

Getting Started• The nano3D is specifically designed for use with 2 cameras with SDI out in order to record 3D material. It has two attached units. Th

Strany 3 - Setting up a 3D record

Setting up a 3D record• Connect the HDMI output from the slave unit to the HDMI input of the master unit with the included HDMI 9 inch cable• Connect

Strany 4 - 3D Menu Options (Video → 3D)

• CuePlay• Loop Record• Prebuffer• Timelapse• Crank• E to E directSetting up for 3D playback• If playing back footage that was recorded with “Record C

Strany 5

CombineThe nano3D can combine two camera images and output them as one 3D video signal through the master SDI output in real time. To view this image

Strany 6

Play RefSets the playback reference to allow for synchronized playback for viewing recorded video in 3D• Int – Playback reference is set to internal.

Komentáře k této Příručce

Žádné komentáře

Convergent Design nano3D Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Digitální videorekordéry (DVR) Convergent Design nano3D. nano3D™ - POLECAM Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce